Romford railway station

From its inception, the Eastern Counties Railway (ECR) planned a route linking London and Norwich that would take it via Romford. Two routes were considered, that of the current line, and an alternative going through Ilford at Cranbrook Road, then passing near to Gidea Hall and crossing Romford Common approximately following the route of the current A12 before returning to the current railway alignment at Brentwood.[3]

When the line was constructed, the first Romford station opened on 20 June 1839 as a single island platform located to the west of Waterloo Road, and formed the eastern terminus of the initial part of the Eastern Counties Railway from Mile End. Both stations acted as temporary termini, with the line extending east to Brentwood and west to Shoreditch in 1840.

In 1844, the station was relocated to its current position, some 400 metres (1,300 ft) east of the original. Around this time, the gauge of the ECR was changed from 5 ft (1,524 mm) to standard gauge of 1,435 mm (4 ft 8+1⁄2 in). In 1860, the station was remodelled with platforms on each side of the line with access to the new station by a covered walkway from South Street to the London-bound platform and via an open slope and steps for the country-bound platform.[4] Soon after this, the goods depot, which was situated to the south of the station, was connected to the Ind Coope brewery via a tunnel under the line.[5] Other non-passenger traffic included goods for the Romford Gas Works and for cattle pens accessed from St Andrews Road,[6] which were necessary due to the cattle market held in Romford every Wednesday.[7]

The construction of the Tilbury Docks in the 1850s gave expanded opportunities for rail traffic, and three proposals were made for a railway linking Romford to Tilbury. The London, Tilbury and Southend Railway (LT&S) were successful, and on 7 June 1893, the LT&S opened a station in Romford, on their line to Upminster, linking to the already existing connection from Upminster to Grays on the LT&S line to Tilbury. The LT&S had hoped to negotiate with the Great Eastern Railway (GER, the successor of the ECR) to use their station, but concerns over fast trains led to the GER declining and a completely new station was built with a single platform and an entrance on the opposite side of South Street to the GER station. A footbridge was built to connect the two stations but was often closed during the day.[8]

In the 1930s increasing traffic on the line led to two additional tracks being added on the north side, the line having been quadrupled to a point east of Romford previously in 1901.[9] This gave the station 4 platforms, and this became 5 platforms when, in 1934, the entrance to the platform of the line to Upminster was closed and the access to the single platform was provided by the footbridge from the main station platforms.[10]

Electric trains started on the line from Liverpool Street to Shenfield in 1949, giving Romford 15 trains per hour to London during peak hours, and 6 trains per hour off-peak, a pattern that continued for over half a century.[11]

In May 2015, the Upminster branch line transferred from Abellio Greater Anglia to London Overground and the regular Shenfield "metro" service transferred to TfL Rail.[12][13]

• On 29 December 1944, one person was killed and three were injured when, in darkness and heavy fog, a Chelmsford–London service passed two signals at danger on the approach to Romford and ran into the rear of a stationary freight train. The passenger train's speed at the moment of impact was about 15 mph (24 km/h). One crew member on the goods train was killed instantly. The Chelmsford train driver was held responsible for the collision in a Ministry of War Transport report.[14]
• On 4 February 2010, two people standing on the platforms at Romford were injured when stone ballast was shed from a freight train passing through the station. Subsequent examination found that the train wagon's doors had not been properly closed when it departed from the goods yard at Acton, bound for Ipswich.[15]

The majority of services are currently operated by TfL Rail, which runs the stopping "metro" route between Liverpool Street and Shenfield. Greater Anglia also operates medium-distance services between Liverpool Street and destinations in the East of England, while London Overground runs the half-hourly "push and pull" service between Romford and Upminster.

The typical off-peak Monday to Saturday service from Romford is:[16]

• 8 trains per hour (tph) to London Liverpool Street, of which:
  • 6 call at all stations (TfL Rail),
  • 2 call at Stratford and Liverpool Street (Greater Anglia);
• 6 tph to Shenfield, calling at all stations (TfL Rail);
• 2 tph to Upminster, calling at the only station, Emerson Park (London Overground);
• 1 tph to Southend Victoria calling at Shenfield, then all stations (Greater Anglia);
• 1 tph to Colchester Town calling at Shenfield, Chelmsford, Witham, then all stations (Greater Anglia).

In 2017 new Class 345 trains began entering service as Crossrail partially opened. Platforms 2 to 5 will be extended from their current length of between 179 metres (196 yd) and 182 metres (199 yd) to accommodate the Crossrail trains, which are over 200 metres (220 yd) long. New lifts, signage, help points, customer information screens and CCTV will also be installed.[17] These upgrade works are scheduled to be completed at the end of 2021, after delays due to the COVID-19 pandemic.[18]

A number of London Buses routes serve the station.

• Media related to Romford railway station at Wikimedia Commons
• Train times and station information for Romford railway station from National Rail
• Excel file displaying National Rail station usage information for 2005/06 Archived 22 January 2013 at the Wayback Machine
• Old LTSR entrance after conversion