KITSUNE

KITSUNE (Kyutech standardized bus Imaging Technology System Utilizing Networking and Electron content measurements) is a nanosatellite developed by the HAK consortium, which consists of Haradaseiki Kogyo, Addnics Corporation, and Kyushu Institute of Technology (Kyutech).[1] The spacecraft is a 6U CubeSat, and carries a high-resolution camera for Earth observation.[2] KITSUNE will be carried to the International Space Station (ISS) on board Cygnus NG-17, and will be deployed from the ISS's Kibō Module.[1] The deployment service of KITSUNE will be provided by Mitsui Bussan Aerospace.[1]

KITSUNE
Mission typeTechnology demonstration
OperatorHAK Consortium
Spacecraft properties
Spacecraft typeCubeSat
Orbital parameters
Reference systemGeocentric
RegimeLow Earth
 

Mission

While in orbit, KITSUNE will conduct several missions, including observing Earth with a resolution of 5 m, and communicating in C band.[3] It will also conduct store and forward, collecting data from ground-based sensor terminals.[4][5] Its optics is based on an smc PENTAX-DA* 300mm F4ED[IF]SDM lens.[6]

SPATIUM-II

In the SPATIUM-II (SPATIUM : Space Precision Atomic-clock TIming Utility Mission) mission, a UHF signal will be sent from ground stations, and KITSUNE's on board software-defined radio and Raspberry Pi computer will calculate the signal delay time. From the signal delay time, the integral value of the charge density between the satellite and ground station (total electron content) can be calculated. The SPATIUM-II mission aims to demonstrate detecting signal delay time by an accuracy of 100 nanoseconds.[7]

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.